NEWS
Position:
Homepage
>
>
>
What are the most common quality problems of mortar? Why do these problems occur?

What are the most common quality problems of mortar? Why do these problems occur?

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2019-10-14
  • Views:25

(Summary description)

What are the most common quality problems of mortar? Why do these problems occur?

(Summary description)

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2019-10-14
  • Views:25
Information

Most mortar is applied onto the surface of buildings, such as plastering mortar, floor mortar, waterproof mortar and decorative mortar, etc. Mortar has a very large contact area with the surrounding environment, so that the moisture in mortar is very easy to lose. In addition, the used site of mortar is not easy for conservation. And mortar is a brittle material, so the most quality problem prone to occur is cracking of mortar, for the main reasons as below.

① Chemical Shrinkage

Most mortar uses cement as a cementitious material. After cement is in contact with water, hydration reaction will occur to form hydration products. The reaction will consume part of water. Since the volume change arising therefrom is related to the hydration products, it is commonly referred to as autogenous volume deformation.

② Drying Shrinkage

Mortar is usually applied onto the surface of buildings, larger in the surface area and thinner in the thickness. Mortar often constitutes a whole together with base course. Most base-course materials have a certain water adsorption capacity. After mortar is in contact with base course, on the one hand, the moisture in mortar will be constantly absorbed by base course; on the other hand, the mortar surface will be in direct contact with the surrounding environment, more sensitive to the changes in the environment, and the moisture on the mortar surface will be evaporated into the atmosphere. The drier the environment is, the faster the moisture evaporation will be, resulting in substantial loss of moisture in mortar, and mortar will produce a greater dry shrinkage deformation because of water loss.

③Temperature Deformation

Temperature deformation depends on the site of mortar applied. The top floor east and west exterior walls of buildings suffer the most temperature stress. The taller the building is, the more temperature stress the exterior wall body of superstructure will suffer. If mortar is applied in the above-mentioned parts, then the temperature stress mortar suffers will be more than that in other parts. If the shear stress or tensile stress between mortar and base course is less than temperature stress, then mortar will either get cracked itself, or get separated from base course in order to release temperature stress, thus producing temperature deformation.

Solutions to Temperature Deformation: firstly, improve the tensile strength of mortar itself and the shear strength between mortar and base course; secondly, avoid complex planes and temperature stress concentration in the design of buildings and structures; finally, adopt exterior protection methods to increase mortar resistance to temperature stress, such as double-layer grid cloth for exterior wall thermal insulation corners.

Keyword:

Scan the QR code to read on your phone

CONTACT US

 

Shanxi Zhicheng Cellulose Co., Ltd.

TEL:+86-0350-8511888
PHONE:19833138888
E-Mail: sxzcxws@126.com
Address: Innovation Avenue, Yuanping Economic and Technological Development Zone, Xinzhou City, Shanxi Province

Copyright: Shanxi Zhicheng Cellulose Co.,Ltd & Shanxi Zhicheng Cellulose Co., Ltd.    冀ICP备19019015号-3